• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Inside Screw, Non-Rising Stem, Integral Seat.
• Forged Brass Bonnet, Wedge, Stem and Gland Nut.
• Body designed for convenient fitting where space constraint is the factor.
• Designed sheet metal handwheel for a firm grip and convenient operation.
• Premium Quality PTFE Gland Packing.

Test Pressure (Hydrostatic) :

Shell : 24 kg/cm²g (340 psig)

Seat : 16 kg/cm²g (225 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 225°C

• Design Standard BSEN 12288 (BS 5154).
• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Inside Screw, Non-Rising Stem, Integral Seat.
• Designed sheet metal handwheel for a firm grip and convenient operation.
• Premium Quality PTFE Gland Packing.

Test Pressure (Hydrostatic) :

Shell : 25 kg/cm²g (350 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 225°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Inside Screw, Non-Rising Stem, Integral Seat, Solid Wedge.
• Designed sheet metal handwheel for a firm grip and convenient operation.
• Premium Quality PTFE Gland Packing.
• Design Standard IS 778, Class-1.
• Provision for re-packing under pressure.

Shell : 1.5 MPa

Seat & Back Seat : 1.0 MPa

Maximum Working Temperature : 225°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Inside Screw, Non-Rising Stem, Integral Seat, Solid Wedge.
• Designed sheet metal handwheel for a firm grip and convenient operation.
• Premium Quality PTFE Gland Packing.
• Design Standard IS 778, Class-2.
• Provision for re-packing under pressure.

Test Pressure (Hydrostatic) :

Shell : 2.4 MPa

Seat & Back Seat : 1.6 MPa

Maximum Working Temperature : 225°C

• Screwed female ends to IS 554 / BS21 / ISO – 7.
• Screwed in Bonnet, Inside Screw, Rising Stem, Integral Seat, Solid Wedge.
• Provision for Re-packing under pressure.
• Designed sheet metal handwheel for a firm grip and convenient operation.
• Premium quality PTFE Gland Packing.

Test Pressure(Hydrostatic) Class-1 :

Shell : 1.5 Mpa

Seat & Back Seat : 1.0 Mpa

Maximum Working Temperature : 225°C

• Flanged Ends to IS 778.
• Screwed in Bonnet, Inside Screw, Non-Rising Stem, Integral Seat, Solid Wedge.
• Designed sheet metal handwheel for a firm grip and convenient operation.
• Provision for re-packing under pressure.
• Design Standard IS 778, Class-1.

Test Pressure (Hydrostatic) :

Shell : 1.5 MPa

Seat & Back Seat : 1.0 MPa

Maximum Working Temperature : 225°C

• Design Standard API 602 / BSEN ISO 15761 (BS 5352).
• Body and Bonnet are Phosphated, to ensure maximum resistance from rust.
• Bolted Bonnet, Outside Screw, Yoke Type, Rising Stem.
• Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.

Test Pressure :

Shell (Hydrostatic) : 207 bar (3000 psig)

Seat & Back Seat(Hydrostatic) : 152 bar (2200 psig)

Maximum Working Temperature : 425°C

• Design Standard API 602 / BSEN ISO 15761 (BS 5352).
• Body and Bonnet are Phosphated, to ensure maximum resistance from rust.
• Bolted Bonnet, Outside Screw, Yoke Type, Rising Stem.
• Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.

Test Pressure :

Shell (Hydrostatic) : 207 bar (3000 psig)

Seat & Back Seat(Hydrostatic) : 152 bar (2200 psig)

Seat (Pneumatic) : 6.9 bar (100 psig)

Maximum Working Temperature : 425°C

• Design Standard BSEN ISO 10434 / API 600.
• Bolted Bonnet, Outside Screw, Yoke Type, Rising Stem.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Handwheel Operated.
• Flanged Ends as per ASME B 16.5 Class-150.

Test Pressure (Hydrostatic) :

Shell : 31 kg/cm²g (425 psig)

Seat : 21kg/cm²g (313 psig)

Seat (Steam) : 10.55 kg/cm²g (150 psig)

Maximum Working Temperature : 425°C

• Design Standard IS 14846 PN-1.0.
• Bolted Bonnet, Inside Screw, Non-Rising Stem.
• Rigid and Sturdy design.
• Handwheel Operated.
• Flange Ends as per IS 1538.

Test Pressure (Hydrostatic) :

Shell : 1.5 MPa

Seat : 1.0 MPa

Maximum Working Temperature : 80°C

• Design Standard IS 14846 PN – 1.6.
• Bolted Bonnet, Inside Screw, Non-Rising Stem.
• Rigid and Sturdy design.
• Handwheel Operated.
• Flange Ends as per IS 1538.

Test Pressure (Hydrostatic) :

Shell : 2.4 MPa

Seat : 1.6 MPa

Maximum Working Temperature : 80°C

• Design Standard IS 14846.
• Flanged ends to IS 1538.
• Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge.
• Hand wheel operated.
• Rigid and Sturdy design.
• Provision of Re-Packing under pressure.

Test Pressure (Hydrostatic) :

Shell : 1.5 MPa

Seat : 1.0 MPa

Maximum Working Temperature : 80°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Single Piece Design, Integral Seat.
• Meant for Vertical Lines Only.
• Permits flow in one direction and shuts automatically if the flow reverses.
• Spring Loaded and ‘O’ Ring Type.
• Also available with metal to metal seating.

Test Pressure (Hydrostatic) :

Shell : 25 kg/cm²g (350 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 80°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet.
• Screwed in Bonnet.
• Permits flow in one direction and shuts automatically if the flow reverses.
• Disc is guided in Body as well as in Bonnet.
• Chrome Finish.

Test Pressure (Hydrostatic) :

Shell : 20 kg/cm²g (285 psig)

Seat : 13.5 kg/cm²g (192 psig)

Maximum Working Temperature : 80°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Integral Seat.
• Permits flow in one direction and closes automatically if the flow reverses.
• Metal Disc is mushroom shaped with spherical seating surface.
• Meant for Horizontal Lines only.
• Disc is guided in Body as well as in Bonnet.
• Medium Pattern.
• Also available with metal to metal seating.

Test Pressure (Hydrostatic) :

Shell : 20 kg/cm²g (285 psig)

Seat : 13.5 kg/cm²g (192 psig)

Maximum Working Temperature : 80°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Angle Pattern, Screwed in Bonnet, Integral Seat.
• Permits flow in one direction and closes automatically if the flow reverses.
• Metal Disc is mushroom shaped with spherical seating surface.
• Disc is guided in Body as well as in Bonnet.
• Medium Pattern.
• Also available with metal to metal seating.

Test Pressure (Hydrostatic) :

Shell : 24 kg/cm²g (340 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 80°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Integral Seat.
• Permits flow in one direction and closes automatically if the flow reverses.
• Metal Disc is mushroom shaped with spherical seating surface.
• Meant for Horizontal Lines Only.
• Disc is guided in Body as well as in Bonnet.
• Heavy Pattern.
• Also available with metal to metal seating.

Test Pressure (Hydrostatic) :

Shell : 35 kg/cm²g (500 psig)

Seat : 20 kg/cm²g (285 psig)

Maximum Working Temperature : 80°C

• Flanged Ends to BS 10 Table ‘D’.
• Screwed in Bonnet, Integral Seat.
• Permits flow in one direction and shuts automatically if the flow reverses.
• Metal Disc is mushroom shaped with spherical seating surface.
• Meant for Horizontal Lines Only.
• Disc is guided in Body as well as in Bonnet.
• Medium Pattern.
• Also available with metal to metal seating.

Test Pressure (Hydrostatic) :

Shell : 24 kg/cm²g (340 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 80°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed on Bonnet.
• Permits flow in one direction and closes automatically if the flow reverses.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Metal Disc is mushroom shaped with spherical seating surface.
• Meant for Horizontal Lines Only.
• Disc is guided in Bonnet.

Test Pressure (Hydrostatic) :

Shell : 35 kg/cm²g (500 psig)

Working Pressure (Steam) : 10.55 kg/cm²g (150 psig)

Maximum Working Temperature : 225°C

• Flanged Ends to BS 10 Table ‘F’.
• Screwed on Bonnet.
• Permits flow in one direction and closes automatically if the flow reverses.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Metal Disc is mushroom shaped with spherical seating surface.
• Meant for Horizontal Lines Only.
• Disc is guided in Bonnet.

Test Pressure (Hydrostatic) :

Shell : 35 kg/cm²g (500 psig)

Working Pressure (Steam) : 10.55 kg/cm²g (150 psig)

Maximum Working Temperature : 225°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Single Piece Design.
• Meant for Vertical Lines Only.
• Permits flow in one direction and closes automatically if the flow reverses.
• Design Standard IS 778, Class-1.
• Also available with metal to metal seating.

Test Pressure (Hydrostatic) :

Shell : 1.5 MPa

Seat : 0.25 MPa

Maximum Working Temperature : 80°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, meant for Horizontal Lines Only.
• Permits flow in one direction and shuts automatically if the flow reverses.
• Metal Disc is mushroom shaped with spherical seating surface.
• Disc is guided in Body as well as in Bonnet.
• Design Standard IS 778, Class-1.
• Also available with metal to metal seating.

Test Pressure (Hydrostatic) :

Shell : 1.5 MPa

Seat : 0.25 MPa

Maximum Working Temperature : 80°C

• Flanged Ends to IS 778.
• Screwed in Bonnet, meant for Horizontal Lines Only.
• Permits flow in one direction and closes automatically if the flow reverses.
• Metal Disc is mushroom shaped with spherical seating surface.
• Disc is guided in Body as well as in Bonnet.
• Design Standard IS 778, Class-1.
• Also available with metal to metal seating.

Test Pressure (Hydrostatic) :

Shell : 1.5 MPa

Seat : 0.25 MPa

Maximum Working Temperature : 80°C

• Screwed Female Ends to BSPT.
• Straight Pattern, Screwed / Bolted Cover.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Flanged Ends to BS 10 Table ‘H’.
• Straight Pattern, Screwed / Bolted Cover.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.

Test Pressure (Hydrostatic) :

Shell 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Screwed Female Ends to BSPT.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Two Piece Design.

• Flanged Ends to BS 10 Table ‘H’.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Two Piece Design.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Flanged End to BS 10 Table ‘F’.
• Tapered Plug accurately ground to ensure water tightness.
• Quarter Turn, Rectangular Port.
• High Quality lubricated Gland Packing.

Test Pressure (Hydrostatic) :

Shell : 21.10 kg/cm²g (300 psig)

Working Pressure (Steam) : 10.55 kg/cm²g (150 psig)

Maximum Working Temperature : 225°C

• Flanged Ends to BS 10 Table ‘H’.
• Outside Screw, Yoke Type with Straight Inlet.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Comprises of Two Valves : a Stop Valve operated by a Handwheel and a back pressure Check Valve.
• Premium Quality lubricated Gland Packing.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Flanged Ends to BS 10 Table ‘H’.
• Outside Screw, Yoke Type with Curved Inlet.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Comprises of Two Valves : a Stop Valve operated by a Handwheel and a back pressure Check Valve.
• Premium Quality lubricated Gland Packing.
• Provided with a Drain Plug for easy maintenance of Check Valve.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Screwed Female Ends to BSPT.
• Straight Pattern, Screwed / Bolted Bonnet, Outside Screw, Rising Stem, Yoke Type.
• Provision for re-packing under pressure.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Metal Disc is mushroom shaped with spherical seating surface.
• Handwheel Operated.
• Body Seat Ring and Disc are heat treated for longer life.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Flanged Ends to BS 10 Table ‘H’.
• Straight Pattern, Screwed / Bolted Bonnet, Outside Screw, Rising Stem, Yoke Type.
• Provision for re-packing under pressure.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Metal Disc is mushroom shaped with spherical seating surface.
• Premium Quality lubricated Gland Packing.
• Handwheel Operated.
• Body Seat Ring and Disc are heat treated for longer life.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Flanged Ends to DIN 2533 PN 16RF.
• Straight Pattern, Bolted Cover.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Minimum pressure drop inside the body due to streamlined body design.

Test Pressure (Hydrostatic) :

Shell : 26 kg/cm²g (370 psig)

Working Pressure (Steam) : 13 kg/cm²g (185 psig)

Maximum Working Temperature : 220°C

• Flanged Ends to DIN 2533 PN 16RF.
• Angle Pattern, Bolted Cover.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Minimum pressure drop inside the body due to streamlined body design.

Test Pressure (Hydrostatic) :

Shell 26 kg/cm²g (370 psig)

Working Pressure (Steam) : 13 kg/cm²g (185 psig)

Maximum Working Temperature 220°C

• Flanged Ends to DIN 2545 PN 40.
• Bolted Cover, Straight Pattern.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.
• Minimum pressure drop inside the body due to well contoured body design.
• Suitable for thermic fluid application also.

Test Pressure (Hydrostatic) :

Shell : 60 bar (870 psig)

Maximum Working Pressure : 40 bar (580 psig)

Maximum Working Temperature : 425°C

• Design Standard API 602/BSEN ISO 15761 (BS 5352).
• Body and Cover are Phosphated, to ensure maximum protection from rust.
• Bolted Cover.
• Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.

Test Pressure (Hydrostatic) :

Shell : 207 bar (3000 psig)

Seat : 152 bar (2200 psig)

Maximum Working Temperature : 425°C

• Design Standard API 602 / BSEN ISO 15761 (BS 5352).
• Body and Cover are Phosphated, to ensure maximum protection from rust.
• Bolted Cover.
• Screwed Female Ends to BSPT / NPT / Socket Welded to ANSI B16.11.

Test Pressure (Hydrostatic) :

Shell : 207 bar (3000 psig)

Seat : 152 bar (2200 psig)

Maximum Working Temperature : 425°C

• Design standard API 594.
• Wafer Type Design, to take lesser space than the conventional Check Valve.
• Being light in weight, is more rigid than the standard Swing Type Check Valve, which needs expensive foundation and special supports.
• Being cylindrical body, stresses are uniformly distributed.
• Much longer seat life because of Bronze / S.S to Rubber contact.
• End connections are designed to suit flanges drilled to ANSI B Class-125 / ASME B Class-150.
• Water hammering effect is minimized in this design, since the closing of valve does not depend upon any back pressure or flow.
• Each plate being half of the size of the swing check valve disc, provides straight flow path offering minimal resistance because of the spring’s assistance as closing of the valve initiates as soon as flow velocity dips below the designated minimum velocity.
• Less wear and tear of seat surfaces.

Test Pressure (Hydrostatic) :

Shell : 24.50 kg/cm²g (350 psig)

Seat : 16 kg/cm²g (230 psig)

Working Temperature : -18°C to 80°C

• Design Standard IS 5312 – 1.
• Flanged Ends to IS 1538.
• Seating design – Swing Type.
• Bolted Cover.
• Renewable Seat with Premium Quality Rubber Flap.
• Flexible installation (Horizontal / Vertical)

PN1.0 –

Test Pressure (Hydrostatic) :

Shell : 1.5 MPa

Seat : 1.0 MPa

Maximum Working Temperature : 80°C

• Design Standard IS 5312 – 1 .
• Flanged Ends to IS 1538.
• Seating design – Swing Type.
• Bolted Cover.
• Renewable Seat with Premium Quality Rubber Flap.
• Flexible installation (Horizontal / Vertical)

PN1.6 –

Test Pressure (Hydrostatic) :

Shell : 2.4 MPa

Seat : 1.6 MPa

Maximum Working Temperature : 80°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Full Bore, Two Piece Design.
• Quarter Turn, Lever Operated.
• Provided with Stainless Steel Ball.
• Premium Quality PTFE Gland Packing and Seating.

Test Pressure (Hydrostatic) :

Shell : 25 kg/cm²g (350 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 220°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Full Bore, Two Piece Design.
• Quarter Turn, Lever Operated.
• Provided with Stainless Steel Ball.
• Premium Quality PTFE Gland Packing and Seating.

Test Pressure (Hydrostatic) :

Shell : 20 kg/cm²g (285 psig)

Seat : 13.5 kg/cm²g (192 psig)

Maximum Working Temperature : 220°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Full Bore, Two Piece Design.
• Quarter Turn, Lever Operated.
• Provided with Forged Brass Hard Chrome Plated Ball.
• Premium Quality PTFE Gland Packing and Seating.
• Chrome Finish.

Test Pressure (Hydrostatic) :

Shell : 25 kg/cm²g (350 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 220°C

• Design Standard BSEN ISO 17292 (BS 5351).
• Screwed Female Ends to BSPT / NPT / Socket Weld.
• Reduced Bore, Three Piece Design.
• Superb in Quality and Performance.

Test Pressure (Hydrostatic) :

Shell : 31 kg/cm²g (440 psig)

Maximum Working Pressure : 21 kg/cm²g (300 psig)

Seat (Pneumatic) : 7kg/cm²g (100 psig)

Maximum Working Temperature : 220°C

• Design Standard BSEN ISO 17292 (BS 5351).
• Flanged Ends to ASME B B16.5 Class – 150 (Drilled).
• Three Piece Design.
• Superb in Quality and Performance.

Test Pressure (Hydrostatic) :

Shell : 31 kg/cm²g (440 psig)

Maximum Working Pressure : 21 kg/cm²g (300 psig)

Seat (Pneumatic) : 7 kg/cm²g (100 psig)

Maximum Working Temperature : 220°C

• Design Standard BSEN ISO 17292 (BS 5351).
• Screwed Female Ends to BSPT / NPT / Socket Weld.
• Reduced Bore, Three Piece Design.
• Superb in Quality and Performance.

Test Pressure (Hydrostatic) :

Shell : 31 kg/cm²g (440 psig)

Maximum Working Pressure : 21 kg/cm²g (300 psig)

Seat (Pneumatic) : 7kg/cm²g (100 psig)

Maximum Working Temperature : 220°C

• Design Standard BSEN ISO 17292 (BS 5351).
• Flanged Ends to ASME B B16.5 Class-150 (Drilled).
• Three Piece Design.
• Superb in Quality and Performance.

Test Pressure (Hydrostatic) :

Shell : 31 kg/cm²g (440 psig)

Maximum Working Pressure : 21 kg/cm²g (300 psig)

Seat (Pneumatic) : 7 kg/cm²g (100 psig)

Maximum Working Temperature : 220°C

• Design Standard BSEN ISO 17292 (BS 5351).
• Screwed Female Ends to BSPT / NPT / Socket Weld.
• Reduced Bore, Three Piece Design.
• Superb in Quality and Performance.

Test Pressure (Hydrostatic) :

Shell : 31 kg/cm²g (440psig)

Seat : 21kg/cm²g (300 psig)

Seat (Steam) : 10.55 kg/cm²g (150 psig)

Maximum Working Temperature : 220°C

• Design Standard BSEN ISO 17292 (BS 5351).
• Flanged Ends to ANSI B16.5 Class-150 (Drilled).
• Three Piece Design.
• Superb in Quality and Performance.

Test Pressure (Hydrostatic) :

Shell : 31 kg/cm²g (440 psig)

Seat : 21kg/cm²g (30 psig)

Seat (Steam) : 10.55 kg/cm²g (150 psig)

Maximum Working Temperature : 220°C

• Screwed Female Ends to BSPT.
• Stainless Steel 1 mm hole diameter perforated sheet screen is guided in the body and cover.
• Fine finish and smooth contours reduce pressure drop in the strainer.
• Large screening area makes the strainer efficient in performance.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Flanged Ends to BS 10 Table ‘H’.
• Stainless Steel 1 mm hole diameter perforated sheet screen is guided in the body and cover.
• Fine finish and smooth contours reduce pressure drop in the strainer.
• Large screening area makes the strainer efficient in performance.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Screwed Female Ends to BSPT.
• Stainless Steel (SS 304) perforated sheet screen (Ø1 mm Perforation) is guided in body and bonnet.
• Fine finish and smooth contours to minimize pressure drop inside the strainer.
• Large screening area makes the strainer highly efficient in performance.

Test Pressure (Hydrostatic) :

Shell : 21.10 kg/cm²g (300 psig)

Working Pressure (Steam) : 10.55 kg/cm²g (150 psig)

Maximum Working Temperature : 220°C

• Flanged Ends to BS 10 Table ‘F’.
• Stainless Steel (SS 304) perforated sheet screen (Ø1 mm Perforation) is guided in body and cover.
• Drain Plug is provided to remove the accumulated foreign particles.
• Fine finish and smooth contours to minimize pressure drop inside the strainer.
• Large screening area makes the strainer extremely efficient in performance.

Test Pressure (Hydrostatic) :

Shell : 21.10 kg/cm²g (300 psig)

Working Pressure (Steam) : 10.55 kg/cm²g (150 psig)

Maximum Working Temperature : 220°C

• Flanged Ends to BS 10 Table ‘J’.
• Stainless Steel (SS 304) perforated sheet screen (Ø1 mm Perforation) is guided in body and cover.
• Drain Plug to remove the accumulated foreign particles.
• Fine finish and smooth contours to minimize pressure drop inside the strainer.
• Large screening area makes the strainer more efficient.
• Suitable for thermic fluid application also.

Test Pressure (Hydrostatic) : 49 kg/cm²g (700 psig)

Maximum Working Pressure (Steam) : 24.60 kg/cm²g (350 psig)

Maximum Working Temperature : 425°C

• Flanged Ends to BS 10 Table ‘F’.
• Stainless Steel (SS 304) perforated sheet screen (Ø3mm Perforation) is guided in Body and Cover.
• Large screening area makes the strainer efficient in performance.
• Minimum pressure drop inside the body due to streamlined body contours.

Test Pressure (Hydrostatic) :

Shell : 20 kg/cm²g (300 psig)

Maximum Working Pressure : 10 kg/cm²g (150 psig)

Maximum Working Temperature : 220°C

• Design Standard IS 13095 / BSEN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN10, PN16, PN25, PN40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.
• *Valves with Neoprene / Viton / Silicon lining can also be provided at nominal extra cost.

PN16 –

Test Pressure (Hydrostatic) :

Shell : 24 bar (340 psig)

Seat : 17.6 bar (250 psig)

Maximum Working Temperature : 90°C

Maximum Working Pressure : 16 bar (230 psig)

• Design Standard IS 13095 / BSEN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN10, PN16, PN25, PN40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.
• *Valves with Neoprene / Viton / Silicon lining can also be provided at nominal extra cost.

PN10 –

Test Pressure (Hydrostatic) :

Shell : 15 bar (220 psig)

Seat : 11 bar (160 psig).

Maximum Working Pressure : 10 bar (140 psig)

Maximum Working Temperature : 90°C

PN16 –

Test Pressure (Hydrostatic) :

Shell : 24 bar (340 psig)

Seat : 17.6 bar (250 psig)

Maximum Working Pressure : 16 bar (230 psig)

Maximum Working Temperature : 90°C

• Design Standard IS 13095 / BSEN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN10, PN16, PN25, PN40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

*Valves with Neoprene / Viton / Silicon lining and CF8M (S.S 316)

Disc can also be provided at nominal extra cost.

PN16 –

Test Pressure (Hydrostatic) :

Shell : 24 bar (340 psig)

Seat : 17.6 bar (250 psig)

Maximum Working Pressure : 16 bar (230 psig)

Maximum Working Temperature : 90°C

• Design Standard IS 13095 / BSEN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN10, PN16, PN25, PN40, ASA 150,ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

*Valves with Neoprene / Viton / Silicon lining and CF8M (S.S 316)

Disc can also be provided at nominal extra cost.

PN16 –

Test Pressure (Hydrostatic) :

Shell : 24 bar (340 psig)

Seat : 17.6 bar (250 psig)

Maximum Working Pressure : 16 bar (230 psig)

Maximum Working Temperature : 90°C

• Design Standard IS 13095 / BSEN 593 (BS 5155).
• Wafer Type.
• Double Acting Pneumatic Actuator Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Actuator is with position indicator and adjustable center stopper for both open and closed position.
• Scotch Yoke Technology as the most suitable mechanism for valve and damper operation, producing higher torque at both end positions.
• Actuator is without Rack and Pinion for smooth operation and longer life.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN10, PN16, PN25, PN40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

*Valves with Neoprene / Viton / Silicon lining and CF8M (S.S 316)

Disc can also be provided at nominal extra cost.

PN10 –

Test Pressure (Hydrostatic) :

Shell : 15 bar (220 psig)

Seat : 11 bar (160 psig)

Maximum Working Pressure : 10 bar (140 psig)

Maximum Working Temperature : 90°C

• Design Standard IS 13095 / BSEN 593 (BS 5155).
• Wafer Type.
• Electrical Acuator Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Actuator is with position indicator and adjustable center for both open and closed position.
• Compliant with B.M.S (Building Management System).
• Provided with extended wire for ease of installation.
• IP 67 protection available for outdoor application.
• Inbuilt micro switch position feedback.
• Input Voltage – 24/230 V power supply.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN10, PN16, PN25, PN40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

*Valves with Neoprene / Viton / Silicon lining and CF8M (S.S 316) Disc can also be provided at nominal extra cost.

PN10 –

Test Pressure (Hydrostatic) :

Shell : 15 bar (220 psig)

Seat : 11 bar (160 psig)

Maximum Working Pressure : 10 bar (140 psig)

Maximum Working Temperature : 90°C

• Design Standard IS 13095 / BSEN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN10, PN16, PN25, PN40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

*Valves with Neoprene / Viton / Silicon lining can also be provided at nominal extra cost.

PN25 –

Test Pressure (Hydrostatic) :

Shell : 37.5 bar (540 psig)

Seat : 27.5 bar (400 psig)

Maximum Working Pressure : 25 bar (360 psig)

Maximum Working Temperature : 90°C

• Design Standard IS 13095 / BSEN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron construction.
• S.G Iron disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN10, PN16, PN25, PN40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

*Valves with Neoprene / Viton / Silicon lining can also be provided at nominal extra cost.

PN25 –

Test Pressure (Hydrostatic) :

Shell : 37.5 bar (540 psig)

Seat : 27.5 bar (400 psig)

Maximum Working Pressure : 25 bar (360 psig)

Maximum Working Temperature : 90°C

• Design Standard IS 13095 / BSEN 593 (BS 5155).
• Wafer Type.
• Lever Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.
• Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN10, PN16, PN25, PN40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

*Valves with Neoprene / Viton / Silicon lining and CF8M (S.S 316)

Disc can also be provided at nominal extra cost.

PN25 –

Test Pressure (Hydrostatic) :

Shell : 37.5 bar (540 psig)

Seat : 27.5 bar (400 psig)

Maximum Working Pressure : 25 bar (360 psig)

Maximum Working Temperature : 90°C

• Design Standard IS 13095 / BSEN 593 (BS 5155).
• Wafer Type.
• Gear Operated.
• S.G Iron construction.
• Stainless Steel (CF8 / CF8M*) Disc which is accurately guided between the two stems.
• Integrally moulded rubber lining (EPDM / Nitrile / Neoprene* / Viton* / Silicon*) as per requirement which provides seating to the valve disc, as a primary seal to the stem and gasket joint with matching pipe flanges.Two Piece Stem design which is precisely guided between the PTFE / Bronze bushes.
• Compatible to sandwich between flanges as per BS 10 Table D, E, F,H, DIN, PN10, PN16, PN25, PN40, ASA 150, ASA 300, IS 778, IS 6392 Table 17 and IS 1538.

PN25 –

Test Pressure (Hydrostatic) :

Shell : 37.5 bar (540 psig)

Seat : 27.5 bar (400 psig)

Maximum Working Pressure : 25 bar (360 psig)

Maximum Working Temperature : 90°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Piston operated, hence more reliable than conventional diaphragm type PRV.
• Compact size, easy to Install.
• Diaphragm-less, Piston Type.
• Demands low maintenance and virtually noiseless.
• Provided with Premium Quality Nitrile Rubber ‘O’Rings.
• Facility provided to install a pressure gauge of 1/4″ B.S.P size to gauge the critically relevant outlet pressure.
• Designed to suit every application requiring accurate pressure ratings.
• All ‘O’ rings are of superior food grade material, hence ensuring absolute zero health hazard.

Test Pressure (Hydrostatic) :

Shell : 35 bar

Maximum Upstream Pressure : 25 bar

Maximum Working Temperature : 80°C

NOTE : At maximum inlet pressure 25 bar, the minimum outlet pressure will be 5.5 bar.

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Most ideal for sensitive and a consistent fluid regulation.
• Diaphragm-less, Piston Type.
• Piston-operated, hence more reliable than conventional diaphragm type PRV.
• Rugged body, compact-sized, easy to install.
• Provided with Premium Quality Nitrile Rubber ‘O’Rings.
• Demands low maintenance and virtually noiseless.
• Most of the critical working components have a distinct edge of being hot brass forged.
• Facility provided to install a Pressure Gauge of 1/4″ B.S.P size to gauge the critically relevant Outlet Pressure.
• Designed to suit every application requiring accurate pressure ratings.
• All ‘O’ rings are of superior food grade material, hence ensuring absolute zero health hazard.

Test Pressure (Hydrostatic) :

Shell : 35 bar

Maximum Upstream Pressure : 25 bar

Maximum Working Temperature : 80°C

NOTE : At maximum inlet pressure 25 bar, the minimum outlet pressure will be 5.5 bar.

• Screwed Female Ends to BSPT.
• Spring Loaded, Direct Acting.
• Metallic Diaphragm Type.

Test Pressure (Hydrostatic) :

Shell 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Design Standard BS 7350.
• Precise double regulation.
• Tamper proof setting with a lock shield.
• PTFE sealing disc to ensure a proper shut off.
• Provided with Inlet / Outlet pressure test cocks.
• Facilitates system design, hence saves energy.
• Handwheel Operated, easy to install and set.
• Accentuates systematic commissioning of the plant for an optimal operation.

Test Pressure (Hydrostatic) :

Shell : 24 kg/cm²g (340 psig)

Maximum Operating Pressure (Hydrostatic) : 16 Bar at an ambient temperature upto 45°C

Maximum Working Temperature : 220°C

• Design Standard BS 7350.
• Precise double regulation.
• Tamper proof setting.
• Handwheel Operated.
• Low noise flow.
• Can be made available with or without drain cocks.
• Superior grade Cast Iron Flange ends to BS 4504 Section 3.2 .
• EPDM Rubber sealing for a soft shut off.

Test Pressure (Hydrostatic) :

Shell : 24 kg/cm²g (340 psig)

Maximum Operating Pressure (Hydrostatic) : 16 Bar at an ambient temperature upto 45°C

Maximum Working Temperature : 110°C

• Design Standard IS 5290.
• Confirming to Type A specification.
• Screwed in Bonnet having instantaneous coupling with single outlet.
• PTFE Gland Packing for longer life and smooth operation of stem.
• Large flow way area to get full flow of water.
• Leakage proof by virtue of elastomer seat.
• Smooth operation of blank cap for quick mounting of water pipe.
• Life long rust free service.

Test Pressure (Hydrostatic) :

Shell : 21 kg/cm²g (300 psig)

Seat : 14 kg/cm²g (200 psig)

Maximum Working Temperature : 110°C

• Design Standard IS 5290.
• Confirming to Type A specification.
• Screwed in Bonnet having instantaneous coupling with single outlet.
• PTFE Gland Packing for longer life and smooth operation of stem.
• Large flow way area to get full flow of water.
• Leakage proof by virtue of elastomer seat.
• Smooth operation of blank cap for quick mounting of water pipe.
• Life long rust free service.

Test Pressure (Hydrostatic) :

Shell : 21 kg/cm²g (300 psig)

Seat : 14 kg/cm²g (200 psig)

Maximum Working Temperature : 110°C

• Screwed Female Ends to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Inside Screw, Rising Stem, Integral Seat.
• Designed sheet metal handwheel for a firm grip and convenient operation.
• Needle Type Spindle Seating.
• Premium Quality PTFE Gland Packing.
• Medium Pattern.

Test Pressure (Hydrostatic) :

Shell : 24 kg/cm²g (340 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 225°C

• Inlet Side Flanged to BS 10 Table ‘D’ and Outlet Side Screwed Female End to IS 554 / BS 21 / ISO 7.
• Screwed in Bonnet, Inside Screw, Rising Stem, Integral Seat.
• Designed sheet metal handwheel for a firm grip and convenient operation.
• Premium Quality PTFE Gland Packing.
• Medium Pattern.
• Ideal for transformers, even for less viscous oil.

Test Pressure (Hydrostatic) :

Shell : 24 kg/cm²g (340 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 225°C

• Screwed Male Ends (Inlet to BSPT and Outlet to BSP) to IS 554 / BS 21 / ISO 7.
• Medium Pattern, Rough Body, Full Flow.
• Metal to Metal contact seating.
• Can withstand heavy impact of water as well as tolerance of sudden pressure.

Test Pressure (Hydrostatic) :

Shell : 20 kg/cm²g (285 psig)

Seat : 13.5 kg/cm²g (192 psig)

Maximum Working Temperature : 225°C

• Screwed Male Ends (Inlet to BSPT and Outlet to BSP) to IS 554 / BS 21 / ISO 7.
• Heavy Pattern, Rough Body, Full Flow.
• Metal to Metal contact seating.
• Can withstand heavy impact of water as well as tolerance of high sudden pressure.

Test Pressure (Hydrostatic) :

Shell : 24 kg/cm²g (340 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 225°C

• Screwed Male End to IS 554 / BS 21 / ISO 7.
• Provided with Hard Chrome Plated Brass Ball.
• Quarter Turn, Lever Operated.
• Chrome Finish.

Test Pressure (Hydrostatic) :

Shell : 25 kg/cm²g (350 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 220°C

• Screwed Male End to IS 554 / BS 21 / ISO 7.
• Provided with Chrome Plated Brass Ball.
• Sturdy Hose Union provided.
• Chrome Finish.

Test Pressure (Hydrostatic) :

Shell : 25 kg/cm²g (350 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 220°C

• Screwed Male End to BSP.
• Asbestos Gland Packing.
• Set available for both, Right Hand and Left Hand operations.
• Polished Body.

Test Pressure (Hydrostatic) :

Shell : 21.10 kg/cm²g (300 psig)

Working Pressure (Steam) : 10.55 kg/cm²g (150 psig).

Maximum Working Temperature : 225°C

• Flanged End to BS 10 Table ‘F’.
• Asbestos Gland Packing.
• Set available for both, Right Hand and Left Hand operations.
• Polished Body.

Test Pressure (Hydrostatic) :

Shell : 21.10 kg/cm²g (300 psig)

Working Pressure (Steam) : 10.55 kg/cm²g (150 psig)

Maximum Working Temperature : 225°C

• Screwed Male End to BSP.
• Automatic Shut Off Device in Water Arm.
• Set available for both, Right Hand and Left Hand operations.
• Premium Quality Sleeve, Reinforced by metallic eye holes provided to avoid any clogging of passage.
• Each piece is fitted with self adjusting inverted taper plug (Stainless Steel) which forms a seal in the renewable moulded asbestos sleeve.
• Sleeve can easily be positioned by a rib which fits in the corresponding groove of the body.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Flanged End to BS 10 Table ‘H’.
• Automatic Shut Off Device in Water Arm.
• Set available for both, Right Hand and Left Hand operations.
• Premium Quality Sleeve, Reinforced by metallic eye holes provided to avoid any clogging of passage.
• Each piece is fitted with self adjusting inverted taper plug (Stainless Steel) which forms a seal in the renewable moulded asbestos sleeve.
• Sleeve can easily be positioned by a rib which fits in the corresponding groove of the body.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Flanged Ends to BS 10 Table ‘H’.
• Maintains fluid tightness and easy in operation because of sliding action of disc.
• Discs are kept in close contact with body rings by means of a spring when the valve is under pressure.
• Premium Quality lubricated Gland Packing.
• Bolted Bonnet.
• Valve is operated by means of Rack and Pinion arrangement, in such a manner that valve is opened fully with half turn of the box key.
• Gland forms a locking guard which prevents removal of the key unless the valve is closed.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Screwed Female Ends to BSPT.
• Provided with integral strainer for trouble free service.
• Stainless Steel (Type 304) perforated 0.5 mm hole diameter screen.
• Renewable 13% Cr. Stainless Steel (SS 410) working parts.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Screwed Male End to BSPT.
• One Piece Design.
• Premium Quality Fusible Alloy used.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Screwed Male End to BSPT.
• Two Piece Design.
• Premium Quality Fusible Alloy used.

Test Pressure (Hydrostatic) :

Shell : 35.15 kg/cm²g (500 psig)

Working Pressure (Steam) : 17.58 kg/cm²g (250 psig)

Maximum Working Temperature : 225°C

• Screwed Female Ends to BSP.
• Two Piece Design.
• Quarter Turn, Lever Operated for convenient operation.
• Stainless Steel (SS 304) rust proof perforated sheet screen is provided in the strainer.
• Carbon Steel Powder Coated and Robust Lever.
• Most suitable for refrigeration and H.V.A.C applications.

Test Pressure (Hydrostatic) :

Shell : 25 kg/cm²g (350 psig)

Seat : 16 kg/cm²g (225 psig)

Maximum Working Temperature : 220°C

• Screwed Ends to BSP Female Inlet and 5/8″ BSP Male Outlet provided with a Flare Nut.
• Two Piece Design.
• Quarter Turn, Lever Operated for convenient operation.
• Stainless Steel (SS 304) rust proof perforated sheet screen is provided in the strainer.
• Stainless Steel, Rust Free and Robust Lever.
• Most suitable for refrigeration and H.V.A.C applications.

Test Pressure (Hydrostatic)

Shell : 20 kg/cm²g (300 psig)

Seat : 13.50 kg/cm²g (192 psig)

Maximum Working Temperature : 220°C

• Screwed Ends to BSP Female Inlet and 5/8″ BSP Male Outlet provided with a Flare Nut.
• Two Piece Design.
• Quarter Turn, Lever Operated for convenient operation.
• Stainless Steel Powder Coated and Robust Lever.
• Most suitable for refrigeration and H.V.A.C applications.

Test Pressure (Hydrostatic) :

Shell : 20 kg/cm²g (300 psig)

Seat : 13.50 kg/cm²g (192 psig)

Maximum Working Temperature : 220°C

• Screwed Female Ends to BSPT.
• Superior Quality Investment Casting.
• Provided with integral strainer.
• Stainless Steel (SS 304) perforated sheet screen (Ø 0.5mm Perforation) for trouble free service.
• Mirror finished moving disc.

Test Pressure (Hydrostatic) :

Shell : 51 bar (740 psig)

Maximum Working Pressure (Steam) : 31 bar (450 psig)

Maximum Working Temperature : 425°C

• Screwed Female Ends to BSP.
• Inverted Bucket Type, Bolted Cover.
• With Stainless Steel (SS 304) renewable working parts.

Test Pressure (Hydrostatic) :

Shell : 21.10 kg/cm²g (300 psig)

Maximum Working Pressure : 10.55 kg/cm²g (150 psig)

Maximum Working Temperature : 220°C

• Flanged End to BS 10 Table ‘J’.
• Automatic Shut Off Device in Water Arm.
• Available for both, Right Hand and Left Hand.
• Premium Quality Sleeve, Reinforced by metallic eye holes, is provided to avoid any clogging of passage.
• Each piece is fitted with self adjusting inverted taper plug (Stainless Steel) which forms a seal in the renewable moulded asbestos sleeve.
• Sleeve can easily be positioned by a rib which fits in the corresponding groove of the body.

Test Pressure (Hydrostatic) :

Shell : 48 kg/cm²g (700 psig)

Test Pressure (Steam) :

Seat : 24.50 kg/cm²g (350 psig)

Maximum Working Temperature : 425°C

• Flanged Ends to BS 10 Table ‘J’.
• Maintains fluid tightness and is easy in operation because of sliding action of discs.
• Discs are kept in close contact with body rings by means of a spring when the valve is under pressure.
• Premium Quality lubricated Gland Packing, Bolted Bonnet.
• Valve is operated by means of Rack and Pinion arrangement, in such a manner that valve is opened fully with half turn of the box key.
• Gland forms a locking guard which prevents removal of the key unless the valve is closed.

Test Pressure (Hydrostatic) :

Shell : 48 kg/cm²g (700 psig)

Test Pressure (Steam) :

Seat : 24.50 kg/cm²g (350 psig)

Maximum Working Temperature : 425°C

• Screwed Male End to IS 554 / BS 21 / ISO 7.
• Open Discharge Type.
• Metal to Rubber contact seating.

Test Pressure (Hydrostatic) :

Shell : 21.10 kg/cm²g (300 psig)

Seat : 10.55 kg/cm²g (150 psig)

Set Pressure Range : 0 – 10 kg/cm²g (Max.)

Maximum Working Temperature : 80°C

• Screwed Male End to IS 554 / BS 21 / ISO7.
• Enclosed Discharge Type.
• Metal to Rubber contact seating.

Test Pressure (Hydrostatic) :

Shell : 21.10 kg/cm²g (300 psig)

Seat : 10.55 kg/cm²g (150 psig)

Set Pressure Range : 0-10 kg/cm²g (Max.)

Maximum Working Temperature : 80°C

• Screwed male end as per IS 554 / BS 21 / ISO 7.
• Chrome plated forged brass body and cover.
• Full bore.
• Sleek in design, ease of installation.
• Handy device used to release entrapped air in any piping system.
• Smooth inner valves reduce pressure loss.
• Maintains system flow efficiency.
• Brilliant aesthetic look.
• Ergonomic design.